收料设备

当前位置:首页 > 产品中心 > 收料设备 >

DMC系列·脉冲除尘器(捕集器)

时间:2020-10-21 17:21 字号

产品详情:


DMC系列·脉冲除尘器(捕集器)
DMC series · Pulse dust collector
工作原理:
含尘气体进入除尘器后,气固两相流在内置的数个滤袋表面被分离,气体滤清后从后道风管被引风机排空,粘附在滤袋上的微细颗粒在定时脉冲清灰气的作用下被击打下来,沿筒壁从下料口卸出。
working principle:
After the dust-containing gas enters the dust collector, the gas-solid two-phase flow is separated on the surface of several built-in filter bags. After the gas is filtered, it is evacuated from the rear duct by the induced draft fan, and the fine particles adhering to the filter bag are struck down under the action of regular pulse cleaning gas and discharged from the discharge port along the wall of the cylinder.
 
设备特点:
  1.   过滤效率高,可捕集0.1μm以上的微细颗粒,完全可以满足气体排放的国家环保标准。
  2.   可以作为旋风分离器后的末端除尘装置,也可以直接作为唯一的收料装置。
  3.   可根据客户物料特点,采用具有耐高温、耐腐蚀等特点的特殊滤料,并且可采用离线分腔式结构,保证高效过滤。也可以采用滤筒、烧结板等其他过滤介质。
  4.  
1. High filtration efficiency, which can capture fine particles above 0.1μm, which can fully meet the national environmental standards for gas emissions.
2. It can be used as the terminal dust removal device after the cyclone separator, or it can be directly used as the only material collection device.
3. According to the characteristics of customer materials, special filter materials with high temperature resistance and corrosion resistance can be used, and offline sub-cavity structure can be used to ensure efficient filtration. Other filter media such as filter cartridges and sintered plates can also be used.
 
技术参数表(Technical Data Sheet)
 
注:具体匹配与产品粒度分布、含尘量、物料比重等有关,具体可与我司工程师沟通,非标型号可定制。
Note: The specific matching is related to the product particle size distribution, dust content, material specific gravity, etc., specific can be communicated with our engineers, non-standard models can be customized.
 
实物图片(Physical picture)
DMC系列·脉冲除尘器(捕集器)