收料设备

当前位置:首页 > 产品中心 > 收料设备 >

XP系列·旋风分离器

时间:2020-10-18 17:16 字号

产品详情:


XP系列·旋风分离器(XP Series · Cyclone seperator
工作原理:
含尘气体进入旋风分离器后,会在漩涡壳内回旋,在离心力、重力和负压引力的综合影响下,较粗的颗粒逐渐下沉,沿筒壁从下料口卸出,较细的颗粒随负压上升气流进入后道除尘设备中收集。
working principle:
After the dusty gas enters the cyclone separator, it will swirl in the vortex shell. Under the combined influence of centrifugal force, gravity and negative pressure attraction, the coarser particles gradually sink and are discharged from the discharge port along the wall of the cylinder. With the rising airflow of negative pressure, the finer particles enter and collect in the following dust removal equipment.
设备特点:
  1. 设备结构简单,清理方便。
  2. 用于产品的粗级分离,收集主产品,一定程度上可以减少过细粉的比例。
  3. 内部易磨损部位(主要是漩涡壳内壁)可以按照需求采用工程陶瓷防护,从而满足多数高新材料避免金属杂质污染的要求。
  4.  
1. The structure of the equipment is simple and easy to clean.
2. Used for coarse separation of products, collecting main products, to a certain extent can reduce the proportion of excessively fine powder.
3. The internal easy-to-wear parts (mainly the inner wall of the vortex shell) can be protected by engineering ceramics as required to meet the requirements of most high-tech materials to avoid metal impurity contamination.
 
技术参数表(Technical Data Sheet):
XP系列·旋风分离器技术参数表
注:具体匹配与产品粒度分布、含尘量、物料比重等有关,具体可与我司工程师沟通。
Note: The specific matching is related to the product particle size distribution, dust content, material specific gravity, etc., and specifics can be communicated with our engineers.
 
实物图片(Physical picture)
XP系列·旋风分离器实物图